Description
3D Printed High Speed FPV Rocket Drone Frame
The 3D Printed High Speed FPV Rocket Drone Frame is a custom-designed frame for DIY FPV drone builders, makers and electronics enthusiasts who want to assemble their own performance-oriented FPV drone.
The frame provides a mounting platform for compatible flight controller stacks, FPV motors and other drone electronics, allowing you to build and customize your own FPV setup.
Its rocket-inspired design gives the drone a distinctive appearance while the 3D-printed construction makes it suitable for DIY drone building, prototyping and customization.
30×30mm Stack Compatible FPV Drone Frame
This 3D Printed High Speed FPV Rocket Drone Frame is designed to accommodate compatible 30×30 mm FPV flight controller/ESC stacks.
Before purchasing, check the mounting-hole spacing and physical dimensions of your flight controller and ESC stack to ensure compatibility.
The frame is suitable for compatible SpeedyBee-type FPV stack configurations that use the required 30×30 mm mounting pattern.
EMAX FPV BLDC Motor Compatible
The frame can be used with suitable EMAX FPV BLDC brushless motors, provided that the motor mounting dimensions and hole pattern match the frame.
Motor compatibility can vary between EMAX motor models, so always verify the motor mounting specifications before installation.
Designed for Custom FPV Drone Builds
This frame is intended as a foundation for creating a customized FPV drone.
Depending on your selected configuration, you can install compatible components such as:
- FPV brushless motors
- Flight controller
- ESC or ESC stack
- FPV camera
- Video transmitter
- Radio receiver
- Antenna
- Battery
- Propellers
These components are not included with the frame.
The builder can select electronics according to the desired drone configuration, weight, performance and application.
3D Printed FPV Drone Frame for DIY Enthusiasts
The 3D Printed High Speed FPV Rocket Drone Frame is suitable for hobbyists who enjoy assembling and experimenting with custom drones.
It can be useful for:
- DIY FPV drone builds
- FPV racing experiments
- FPV freestyle builds
- Drone prototyping
- 3D printing projects
- Electronics projects
- STEM and maker projects
- Custom drone development
Customize Your FPV Drone
One of the advantages of a DIY frame is the ability to choose your own electronics and configuration.
You can select compatible motors, flight controllers, ESCs, FPV cameras, batteries and other components according to your requirements.
This gives makers the freedom to experiment with different drone setups instead of being limited to a preconfigured drone.
High Speed FPV Drone Build
The frame is designed for a high-speed FPV-style drone build, but the actual flight performance depends on the complete configuration.
Factors such as:
- Motor KV
- Motor size
- Propeller specification
- Battery voltage
- ESC capability
- Flight-controller configuration
- Overall drone weight
- Aerodynamic setup
can significantly affect the final flight characteristics.
Therefore, the frame itself does not guarantee a specific flight speed.
Flight Controller Stack Installation
Before assembling your drone, check the mounting dimensions of the flight controller and ESC stack.
This frame uses a 30×30 mm stack mounting pattern. Make sure your selected electronics match this mounting specification.
Proper installation also requires suitable screws, spacers and mounting hardware, depending on the selected electronics.
What You Get
Package Includes
1 × 3D Printed High Speed FPV Rocket Drone Frame
Electronics NOT Included
The following are not included:
- Flight controller
- ESC
- EMAX motors
- Propellers
- FPV camera
- VTX
- Receiver
- Antenna
- Battery
- Charger
- Screws or additional electronics unless specifically mentioned in the product variant
The product is supplied as a 3D-printed frame only.
Important Compatibility Information
Before placing an order, verify the dimensions of your components, including:
- Flight controller mounting pattern: 30×30 mm
- ESC/stack mounting pattern
- Motor mounting-hole pattern
- Motor dimensions
- Propeller clearance
- Camera dimensions
- Battery dimensions
- Required screw and spacer sizes
Compatibility with a particular SpeedyBee or EMAX product depends on the specifications of that exact model.
Frequently Asked Questions
What is included in the package?
The package contains only one 3D-printed FPV drone frame. Electronic components are not included.
Is the flight controller included?
No. The flight controller is not included.
Are EMAX motors included?
No. EMAX motors are not included. The frame is designed to be compatible with suitable EMAX FPV BLDC motors when their mounting specifications match the frame.
What flight controller stack size does the frame support?
The frame is designed for a 30×30 mm stack mounting pattern. Check your specific flight controller/ESC stack before purchase.
Is this a complete FPV drone?
No. This is a frame-only product. You need to purchase and install the required electronics and hardware separately.
Can I use a SpeedyBee flight controller?
Compatible SpeedyBee-type flight controller/ESC stacks with the required 30×30 mm mounting pattern can be used, subject to their physical dimensions and clearance.
Can I customize the drone?
Yes. The frame is intended for DIY builds, allowing you to select compatible motors, flight controller, ESC, FPV camera, battery and other components.
Is the frame suitable for beginners?
It can be used for learning and experimentation, but assembling and flying a high-performance FPV drone requires appropriate knowledge of electronics, LiPo battery safety, motor/ESC selection and flight-controller configuration.
Reviews
There are no reviews yet.